Blade - LazerBlade Uplift - Uplift Profile Rotary Cutting Blade [411-160-842]

The LazerBlade Uplift is the rotary cutting blade used across the Trimax range. The uplift profile drives airflow through the cutting deck, lifting grass into the blade path and throwing clippings cleanly out through the discharge chute. Trimax decks are built around this blade geometry, spindle speed, and deck airflow, so the cut result depends on the right blade being fitted.

It is the fling-tip that takes the wear - by design, concentrating wear on the most inexpensive replaceable component and extending the service life of the blade beam.

Compatible with a wide range of Trimax rotary mowers. Note that some older models may require new blade beams before LazerBlade Uplift blades can be fitted, and certain older models may not be compatible at all. Check your parts manual or the Compatibility tab to confirm fitment for your specific model and series.

• Uplift profile matched to Trimax deck geometry and spindle speed
• Tilt-forward angle reduces grass hang-back in wet or heavy conditions
• Proprietary steel alloy with application-specific hardening
• Fling-tip replacement only
• Genuine part. Maintains your Trimax warranty

Blades per mower

Quantities are for the complete mower. If your model is not listed, check the cutting system section of your parts manual for the correct quantity.

Snake S1 is only available with the 120 cm deck. If your model is not listed, check the cutting system section of your parts manual.

Order at the same time