Bolt - Hex Head M16 x 75 with Hex Nyloc Nut M16 - Trimax Specification - [306-216-705]
£8.19
SKU
306-216-705
The Trimax specification M16 x 75 hex head bolt with nyloc nut for Warlord S3 and Force S1 flail mowers. Supplied with an M16 nyloc nut. One bolt per flail. Replace at every flail change.
-Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Force - S1
- Warlord - S3
- Warlord - S3 LH
- Warlord - S3 RH
No spare parts instructions available for this product.
The specified flail mounting bolt for the Trimax Warlord S3 and Force S1. Supplied with an M16 nyloc nut. One bolt and nut is required per flail. On Warlord S3 and Force S1, replace the nyloc nut at every flail change. Replace the bolt only if the bolt head or threads are damaged.
- M16 x 75mm hex head, Trimax specification grade
- Supplied with M16 nyloc nut
- 1 per flail on Warlord S3 and Force S1
- Replace nut at every flail change. Replace bolt only if damaged
- Genuine part. Maintains your Trimax warranty
Bolts per mower
This table covers the most popular Trimax models. If your mower is not listed, check the relevant sub-assembly section of your parts manual for the correct quantity.
| Mower | Width (cm) | Bolts per mower |
|---|---|---|
| Warlord S3 | 175 | 24 |
| Warlord S3 | 205 | 28 |
| Warlord S3 | 235 | 32 |
| Force S1 | 115 | 16 |
| Force S1 | 145 | 20 |
| Force S1 | 175 | 24 |
| Force S1 | 205 | 28 |
| Force S1 | 235 | 32 |
Order at the same time
| Part | SKU | Quantity | Note |
|---|---|---|---|
| Flail - Forged Flail - Warlord and Force - Trimax Specification | 411-480-643 | 1 bolt per flail | Forged flail for Warlord S3 and Force S1. |
| Nut - Nyloc M16 - Trimax Specification - Trimax Specification | 307-216-053 | 1 per bolt (if replacing nut only) | Replace separately if only the nut needs changing. |