Bolt - Hex Head M10 x 40 - Trimax Specification - [305-210-403]
£1.90
SKU
305-210-403
The Trimax specification M10 x 40 hex head bolt used to mount flails on the Ezeemow and Flaildek rotor. One bolt per flail. Replace at every flail change on Ezeemow and Flaildek models.
-Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Ezeemow - FX
- Ezeemow - S1
- Ezeemow - S2
- FlailDek - FX
- Mowcraft - S1
No spare parts instructions available for this product.
The specified flail mounting bolt for the Trimax Ezeemow and Flaildek flail mowers. One bolt is required per flail. On Ezeemow and Flaildek models, the bolt should be replaced at every flail change alongside the bush and nyloc nut. On Warlord and Force models, the bolt only needs replacing if the head or threads are damaged.
- M10 x 40mm hex head, Trimax specification grade
- 1 per flail
- Replace at every flail change on Ezeemow and Flaildek
- Genuine part. Maintains your Trimax warranty
Bolts per mower
This table covers the most popular Trimax models. If your mower is not listed, check the cutting system section of your parts manual for the correct quantity.
| Mower | Width (cm) | Bolts per mower |
|---|---|---|
| Ezeemow FX | 135 | 28 |
| Ezeemow FX | 155 | 32 |
| Ezeemow FX | 185 | 40 |
| Flaildek FX | 135 | 28 |
| Flaildek FX | 155 | 32 |
| Flaildek FX | 185 | 40 |
Order at the same time
| Part | SKU | Quantity | Note |
|---|---|---|---|
| Flail - Forged Flail - Ezeemow and Flaildek - Trimax Specification | 411-160-105 | 1 bolt per flail | Forged flail for Ezeemow FX and Flaildek FX. |
| Flail - Standard Flail - Ezeemow and Flaildek - Trimax Specification | 411-160-100 | 1 bolt per flail | Standard flail for Ezeemow S2 and Flaildek S2. |
| Flail Mounting Bush - Trimax Specification - 10mm | 402-060-750 | 1 per flail | Replace bush alongside bolt at every flail change. |
| Nut - Plain M10 - Trimax Specification | 307-210-013 | 1 per flail | Replace nut at every flail change. |