Flail - Forged Flail - Ezeemow and Flaildek - Trimax Specification - [411-160-105]
£12.80
SKU
411-160-105
The forged replacement flail for the Trimax Ezeemow FX, Ezeemow S2, Flaildek FX, and Flaildek S2. 97mm long, 16.5mm bore. Replace in full sets to maintain rotor balance.
-Select mower for quantities required and usage notes:
Compatible with the following mowers:
- Ezeemow - FX
- FlailDek - FX
No spare parts instructions available for this product.
The forged replacement flail for the Trimax Ezeemow FX, Ezeemow S2, Flaildek FX, and Flaildek S2. Flails wear through contact with the ground and debris and are a routine service item. Replace as a complete set to maintain rotor balance. Running a partially worn set increases vibration and accelerates wear on rotor bearings.
If you have an older Ezeemow S1 or Flaildek S1, check the compatibility tab. The Ezeemow S1 uses 411-160-000.
- 97 x 57 x 16.5mm forged steel
- Replace as a complete set to maintain rotor balance
- Genuine part. Maintains your Trimax warranty
Flails per mower
This table covers the most popular Trimax models. If your mower is not listed, check the cutting system section of your parts manual for the correct quantity.
| Mower | Width (cm) | Flails per mower |
|---|---|---|
| Ezeemow FX | 135 | 28 |
| Ezeemow FX | 155 | 32 |
| Ezeemow FX | 185 | 40 |
| Flaildek FX | 135 | 28 |
| Flaildek FX | 155 | 32 |
| Flaildek FX | 185 | 40 |
Order at the same time
| Part | SKU | Quantity | Note |
|---|---|---|---|
| Flail Mounting Bush - Trimax Specification - 10mm | 402-060-750 | 1 per flail | Replace the bush at every flail change. |
| Bolt - Hex Head M10 x 40 - Trimax Specification | 305-210-403 | 1 per flail | Replace the bolt at every flail change. |
| Nut - Plain M10 - Trimax Specification | 307-210-013 | 1 per flail | Replace the nut at every flail change. |